Side by side
MiR MiR1350 vs Seegrid Palion Lift EL1
Two autonomous mobile robots a buyer shopping for material movement would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| MiR MiR1350 | Seegrid Palion Lift EL1 | |
|---|---|---|
| Class | Autonomous mobile robot | Autonomous mobile robot |
| Payload | 1350 kg (2976 lb) | 1225 kg (2701 lb) |
| Sold as collaborative | yes | yes |
| Applications listed | material movement | material movement |
| Specs checked | 2026-08-23 | 2026-08-23 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- The MiR MiR1350 is rated for 125 kg more than the Seegrid Palion Lift EL1, about 10 percent. Subtract the weight of the gripper before you compare either figure with your heaviest part, and remember that payload at full speed and full reach is a smaller number than the headline.
- Both are sold as collaborative. That describes a feature set, not a safety verdict: the risk assessment on your part, your gripper and your speed is what decides whether anyone works beside it. Collaborative does not mean fenceless.
- Both are listed for material movement.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
MiR MiR1350. Flat top heavy. 1350x910x322 mm, 1.2 m/s, IP52, 6.75 h loaded. MiR distributors owe first level service and support.
Seegrid Palion Lift EL1. Autonomous lift truck, 2700 lb, lifts to 5 ft 2 in, for low lift high frequency moves. Speed, footprint and runtime not published.
Also on the shortlist for material movement
- Anscer Robotics AR 1250, 1250 kg
- Agilox OCF, 1500 kg
- MiR MiR1200 Pallet Jack, 1200 kg
- OTTO Motors OTTO Lifter, 1200 kg
- OTTO Motors OTTO 1500, 1500 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.