Side by side
Kawasaki CL110N vs Universal Robots UR10g-1750
Two collaborative arms a buyer shopping for machine tending would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| Kawasaki CL110N | Universal Robots UR10g-1750 | |
|---|---|---|
| Class | Collaborative arm | Collaborative arm |
| Payload | 10 kg (22 lb) | 10 kg (22 lb) |
| Reach | 1000 mm | 1750 mm |
| Sold as collaborative | yes | yes |
| Applications listed | machine tending, welding, material movement, palletizing | machine tending, welding, pick and place, palletizing |
| Specs checked | 2026-08-22 | 2026-09-21 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- Payload is effectively a tie at 10 kg and 10 kg. The gripper and the part decide it, not the arm: rated payload is measured at the wrist with no tool on it.
- The Universal Robots UR10g-1750 reaches 750 mm farther than the Kawasaki CL110N. That matters for pallet height, bin depth and machine door clearance more than it matters at a bench.
- Both are sold as collaborative. That describes a feature set, not a safety verdict: the risk assessment on your part, your gripper and your speed is what decides whether anyone works beside it. Collaborative does not mean fenceless.
- Both are listed for machine tending, palletizing, welding. The Kawasaki CL110N is also listed for material movement. The Universal Robots UR10g-1750 is also listed for pick and place.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
Kawasaki CL110N. Name encodes 10 kg, not 110 kg. 1000 mm reach is shorter than the 8 kg CL108N. IP66.
Universal Robots UR10g-1750. Gen 7 g-Series arm (announced 2026-09-14): 8 kg standard, 10 kg extended payload, 1750 mm reach, IP65, 44.7 kg. Runs PolyScope X on the CB7 Core controller. Long reach for wide beds and long seams. Manufacturer specification.
Also on the shortlist for machine tending
- ABB GoFa CRB 15000-10/1.52, 10 kg
- ABB SWIFTI CRB 1300-10/1.15, 10 kg
- AUBO AUBO-i10, 10 kg
- Dobot CR10A, 10 kg
- Doosan M1013, 10 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.