Side by side
Doosan H2017 vs Techman TM20S
Two collaborative arms a buyer shopping for machine tending would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| Doosan H2017 | Techman TM20S | |
|---|---|---|
| Class | Collaborative arm | Collaborative arm |
| Payload | 20 kg (44 lb) | 20 kg (44 lb) |
| Reach | 1700 mm | 1300 mm |
| Sold as collaborative | yes | yes |
| Applications listed | palletizing, material movement, machine tending | palletizing, machine tending, press brake tending |
| Specs checked | 2026-08-22 | 2026-08-22 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- Payload is effectively a tie at 20 kg and 20 kg. The gripper and the part decide it, not the arm: rated payload is measured at the wrist with no tool on it.
- The Doosan H2017 reaches 400 mm farther than the Techman TM20S. That matters for pallet height, bin depth and machine door clearance more than it matters at a bench.
- Both are sold as collaborative. That describes a feature set, not a safety verdict: the risk assessment on your part, your gripper and your speed is what decides whether anyone works beside it. Collaborative does not mean fenceless.
- Both are listed for machine tending, palletizing. The Doosan H2017 is also listed for material movement. The Techman TM20S is also listed for press brake tending.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
Doosan H2017. Long reach heavy series; Doosan states no uplift condition for H models.
Techman TM20S.
Also on the shortlist for machine tending
- AUBO AUBO-i20, 20 kg
- Dobot CR20A, 20 kg
- Elite Robots CS620, 20 kg
- FANUC CRX-20iA/L, 20 kg
- JAKA Zu and MAX series, 20 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.