Side by side
ABB IRB 460-110/2.4 vs FANUC M-410iC/110
Two industrial arms a buyer shopping for material movement would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| ABB IRB 460-110/2.4 | FANUC M-410iC/110 | |
|---|---|---|
| Class | Industrial arm | Industrial arm |
| Payload | 110 kg (243 lb) | 110 kg (243 lb) |
| Reach | 2400 mm | 2403 mm |
| Sold as collaborative | no | no |
| Applications listed | palletizing, packaging, material movement | palletizing, packaging, material movement |
| Specs checked | 2026-08-22 | 2026-08-22 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- Payload is effectively a tie at 110 kg and 110 kg. The gripper and the part decide it, not the arm: rated payload is measured at the wrist with no tool on it.
- Reach is close, 2400 mm against 2403 mm. Neither will rescue a layout that puts the pick and the place too far apart.
- Neither is sold as collaborative. Both need guarding and an integrator's risk assessment before a person shares the floor with them.
- Both are listed for material movement, packaging, palletizing.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
ABB IRB 460-110/2.4. Dedicated four axis palletizer, IP67, floor mount only, 2190 cycles per hour at 60 kg.
FANUC M-410iC/110. Dedicated four axis palletizer, smallest of the M-410iC line.
Also on the shortlist for material movement
- Daihen FD-V100, 100 kg
- Estun ER120-2400-PL, 120 kg
- FANUC R-2000iC/100P, 100 kg
- KUKA KR 120 R2700-2, 120 kg
- Nachi SRA100B, 100 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.