Side by side
ABB IRB 360-1/1130 vs FANUC M-1iA/1H
Two delta robots a buyer shopping for pick and place would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| ABB IRB 360-1/1130 | FANUC M-1iA/1H | |
|---|---|---|
| Class | Delta robot | Delta robot |
| Payload | 1 kg (2 lb) | 1 kg (2 lb) |
| Sold as collaborative | no | no |
| Applications listed | pick and place, packaging | pick and place, material movement |
| Specs checked | 2026-08-23 | 2026-08-23 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- Payload is effectively a tie at 1 kg and 1 kg. The gripper and the part decide it, not the arm: rated payload is measured at the wrist with no tool on it.
- Neither is sold as collaborative. Both need guarding and an integrator's risk assessment before a person shares the floor with them.
- Both are listed for pick and place. The ABB IRB 360-1/1130 is also listed for packaging. The FANUC M-1iA/1H is also listed for material movement.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
ABB IRB 360-1/1130. FlexPicker. ABB's column is DIAMETER: 1130 mm envelope, not a reach. 3 or 4 axes. Cycle 0.30 s at 0.1 kg.
FANUC M-1iA/1H. FANUC America labels 280 mm as Reach but the delta catalog defines it as envelope diameter. Three axes. Trust the catalog.
Also on the shortlist for pick and place
- ABB IRB 360-1/1600, 1 kg
- autonox DELTA RLE3-900, 1 kg
- ABB IRB 365-1.5/1100, 1.5 kg
- ABB IRB 365-1.5/1300, 1.5 kg
- Codian Robotics D5-800-S020-R100, 1.5 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.