Side by side
ABB IRB 1300-12/1.4 vs FANUC M-20iD/12L
Two industrial arms a buyer shopping for material movement would honestly weigh against each other, with the manufacturer-published figures in one table and a plain reading of what the differences mean on a floor. We sell across brands, so we have no reason to tilt it.
| ABB IRB 1300-12/1.4 | FANUC M-20iD/12L | |
|---|---|---|
| Class | Industrial arm | Industrial arm |
| Payload | 12 kg (26 lb) | 12 kg (26 lb) |
| Reach | 1400 mm | 2272 mm |
| Sold as collaborative | no | no |
| Applications listed | machine tending, pick and place, material movement, assembly and screwdriving | material movement, pick and place, palletizing, packaging |
| Specs checked | 2026-08-22 | 2026-08-22 |
Every figure is a manufacturer-published claim, checked on the date shown against the maker's own material, and not one of them survives contact with your part, your rate and your floor without an applications review. Prices are deliberately absent: quotes are prepared by our team and confirmed with the manufacturer.
What the numbers mean on the floor
- Payload is effectively a tie at 12 kg and 12 kg. The gripper and the part decide it, not the arm: rated payload is measured at the wrist with no tool on it.
- The FANUC M-20iD/12L reaches 872 mm farther than the ABB IRB 1300-12/1.4. That matters for pallet height, bin depth and machine door clearance more than it matters at a bench.
- Neither is sold as collaborative. Both need guarding and an integrator's risk assessment before a person shares the floor with them.
- Both are listed for material movement, pick and place. The ABB IRB 1300-12/1.4 is also listed for machine tending, assembly and screwdriving. The FANUC M-20iD/12L is also listed for palletizing, packaging.
What a spec sheet cannot tell you
The gripper, the fixture and the integrator decide more of the outcome than the arm. Cycle time on your part is a test, not a datasheet figure. Service footprint, spare parts and who answers the phone at 2 AM differ by brand and by state. And the price difference between two arms in the same class is usually smaller than the difference between two integrators' quotes for the same cell. A model number is not a specification, and the gripper is the project.
From our matrix
ABB IRB 1300-12/1.4. Highest payload of the 1300 family, newest variant in the lineup.
FANUC M-20iD/12L. Long arm L variant, slim curved J2 arm; reach cross checked on fanuc.eu.
Also on the shortlist for material movement
- ABB IRB 2600-12/1.65, 12 kg
- ABB IRB 2600-12/1.85, 12 kg
- Estun ER12B-1510, 12 kg
- FANUC M-10iD/12, 12 kg
- FANUC M-710iC/12L, 12 kg
Ask about these two for your job
Free, about two minutes, no phone number. Joe will tell you which belongs on your shortlist, what beats both, and what has to be true for the math to work.